OXVA VPrime 2 Vape Kit – 60W Pod Mod System

The OXVA VPrime 2 Vape Kit sets a benchmark for portable sub-ohm and restricted direct-lung (RDL) pod performance. Upgraded with an internal 3400mAh high-density battery and delivering up to 60W of adjustable power, the OXVA VPrime 2 gives sub-ohm cloud chasers and direct-lung enthusiasts genuine box mod vapor production in an ergonomic, pocketable form factor. Featuring OXVA’s next-generation UniTech 3.0 Dual Mesh coil architecture, 5V/3A ultra-fast charging, and an intuitive 0.98-inch color display, the VPrime 2 bridges the gap between everyday pod convenience and serious cloud performance.

Engineered with both an ultra-responsive auto-draw sensor and a physical tactile fire button, the VPrime 2 Pod Kit lets you tailor every session. Switch on Eco mode to conserve battery during daily commutes, or kick the device into Boost mode to fire both mesh layers simultaneously for explosive flavour extraction and thick vapor plumes. TPD-compliant with a leak-resistant 2ml top-fill cartridge setup, it is a versatile hybrid kit for both high-VG shortfills and lower-strength 50/50 nic salts.

Key Features of the OXVA VPrime 2

• Massive 3400mAh Built-In Battery: Extended battery capacity allows for full-day sub-ohm vaping at higher wattages without midday charging interruptions.
• 5W–60W Variable Wattage: Fine-tune your output down to the single watt to match your preferred vapor temperature and draw density.
• UniTech 3.0 Dual Mesh Technology: Twin-layer mesh heating elements deliver rapid ramp-up, even heat dispersion, and superior coil longevity.
• Dedicated Power Modes: Choose between Boost mode for maximum vapor density and Eco mode to conserve power and prolong pod lifespan.
• 5V/3A USB-C Fast Charging: High-amperage charging restores roughly 70% battery capacity in approximately 30 minutes.
• Vibrant 0.98-Inch Colour Screen: Clear, rotatable digital UI displays real-time battery status, coil resistance, wattage output, and puff counters.
• Dual Firing Modes & Physical Lock: Choose between seamless auto-draw activation or traditional button firing, with a dedicated mechanical slide switch to prevent pocket misfires.
• Precision Airflow Control (AFC): Smooth sliding lever allows micro-adjustments from a warm, open Direct-to-Lung (DTL) draw to a restricted RDL pull.

UniTech 3.0 Dual Mesh Performance

At the heart of the OXVA VPrime 2 pod system is the re-engineered UniTech 3.0 platform. By implementing twin mesh heating grids surrounding organic cotton wicking, the VPrime 2 eliminates dry spots and hotspots completely. When paired with Boost mode, both mesh layers ignite synchronously, atomising thicker 70/30 VG/PG shortfills instantly to produce saturated, dense vapor that rivals traditional rebuildable tanks and sub-ohm sub-tanks.

3400mAh Battery with 3A Fast Charging

Most pod mod kits sacrifice battery capacity to maintain a slim chassis. The OXVA VPrime 2 solves this balance by packing a 3400mAh cell into an aircraft-grade zinc alloy body weighing just 150 grams. When it does come time to plug in, the upgraded 5V/3A Type-C port cuts downtime significantly compared to conventional 1A or 2A pod chargers, getting you back to full cloud production quickly.

Specifications

What’s Included in the Box?

• 1 x OXVA VPrime 2 Device (3400mAh)
• 1 x 0.4Ω VPrime Dual Mesh Pod (Pre-installed, 28W–38W / up to 60W Boost)
• 1 x 0.6Ω VPrime Dual Mesh Pod (Spare, 20W–25W)
• 1 x USB Type-C Fast Charging Cable
• 1 x User Manual & Pod Usage Recommendation Card

How to Set Up and Operate the OXVA VPrime 2

1. Pod Priming: Unpack your chosen VPrime Dual Mesh pod. Lift the side-fill silicone port and inject your preferred e-liquid until the 2ml chamber is full.
2. Resting Period: Allow the filled pod to sit for 5 to 10 minutes prior to first use so the dual mesh organic cotton fully saturates.
3. Power On: Click the main firing button 5 times within two seconds to turn the device on or off.
4. Adjusting Output: Press the fire button 3 times to enter wattage adjustment mode, using the adjustment buttons to select your preferred power level.
5. Selecting Modes: Click the fire button 4 times to toggle between Eco, Jewel, and Boost firing modes.
6. Locking Firing: Slide the side lock switch to lock the fire button against accidental pocket presses while retaining auto-draw functionality.

Frequently Asked Questions

What is the difference between the 0.4Ω and 0.6Ω VPrime pods?
The included 0.4Ω dual mesh pod is designed for warmer, looser direct-to-lung (DTL) draws and performs best between 28W and 38W with 70/30 VG/PG shortfills. The 0.6Ω pod is optimised for restricted direct-lung (RDL) vaping between 20W and 25W, making it suitable for 50/50 e-liquids and lower-strength nicotine salts.

Can I use original OXVA VPrime pods in the VPrime 2?
Yes, first-generation VPrime pods are backward-compatible with the VPrime 2 battery base, though original pods will default to standard/Eco operation.

How fast does the 3400mAh battery recharge?
With a dedicated 5V/3A power adapter and the included USB Type-C cable, the VPrime 2 charges up to 70% in roughly 30 minutes, with a complete cycle taking under an hour.

Is the OXVA VPrime 2 suitable for mouth-to-lung (MTL) vaping?
The VPrime 2 is specifically engineered as a high-powered RDL and DTL cloud and flavour kit. While you can close down the airflow lever with the 0.6Ω pod, users seeking a tight cigarette-like draw will prefer the OXVA Xlim series.